1 ton gas heat transfer oil furnace products gas heat transfer oil furnace, also known as organic heat carriers, gas, fuel, biomass, electricity as a fuel, heat transfer oil as a medium, the use of heat transfer oil circulating pumps to force the liquid phase of the medium circulation, the heat generated by the heat equipment is transported to the thermal equipment, then sent back to the furnace to be reheated. It is mainly characterized by low pressure and high temperature, which can be highly accurate and precise control of the medium operation.

Gas heat transfer oil furnace unit:

1 ton of gas heat transfer oil is generally converted to 1 ton = 600,000 calories = 700 kilowatts of Wandaika, we usually say that the standard of 1 ton of heat transfer oil is 600,000 calories of heat transfer oil.

The main fuel is 1 ton of gas heat transfer oil:

Heat transfer oil mainly burns the fuel as gas, fuel, biomass, electricity, etc. Gas heat transfer oil is the mainstream of heat transfer oil Products, mainly natural gas, biogas, liquefied petroleum gas, natural gas and other gases as a fuel, but the use of more natural gas, so the gas heat transfer oil can be called natural gas heat transfer oil.

1 ton gas heat transfer oil furnace structure:

One ton gas heat transfer oil furnace adopts horizontal chamber combustion furnace three coils structure, its body consists of external coil, internal coil and intermediate coil, which is widely used in petroleum, chemical, textile, printing, building materials, light industry, food, pharmaceuticals, road construction, heating, asphalt and other industrial fields.

Parameters of 1 ton gas-fired thermal oil furnace:

Product Model: YY(Q)W-700Q

Power: 700 kilowatts

Design pressure: 1.1MPa

Temperature: 280

Thermal efficiency：96%

Heating area: 40.

Blast furnace content oil: 0.5 meters

Boiler weight: 3.7 tons

Water inlet: 100DN

Air outlet: 100DN

Expansion water tank: 1.5.

Oil tank: 2.5.

Chimney diameter: 280mm

Boiler size: 3240mm long, 1470mm wide, 2260mm high

Fuel consumption: 70nm/h

Gas heat transfer oil furnace is a new type of special boiler with low-pressure, high-temperature operating characteristics, the heating temperature can be up to 340 in the liquid phase or 400 in the vapor phase. the need for uniform heating and does not allow the flame to direct heating of the process heating temperature can be between 150 ~ 380 in a variety of production sites using organic heat carriers to heat.

Gas thermal oil furnace is a new type of special boiler with thermal fluid as the heating medium. With low-pressure, high-temperature operation characteristics. With the development of industrial Shengshan and the progress of science and technology, heat transfer oil continues to develop and apply. The working pressure of heat transfer oil is relatively low, but the temperature of the heat transfer fluid in the furnace is high, most of which is flammable and explosive, and if leakage occurs during operation, fire, explosion and other accidents may occur, and even cause casualties and financial losses. Therefore, it is necessary to attach great importance to the safe operation and management of organic heat carrier furnace. Characteristics and parameters