Gas heat transfer oil furnace technology is to heavy oil, light oil or combustible liquid as fuel. Heat conduction oil is the heat carrier. The use of circulating oil pump forced liquid phase circulation. Heat will be delivered to the heat equipment and then return to re-heat the DC special industrial furnace, gas heat transfer oil furnace technology boiler body heating surface structure is compact, the heating surface by the inner and outer dense rows of disc composition, the inner coil for radiation heating surface, the outer surface of the outer coil and the inner coil constitutes a convection heating surface. Gas heat conduction oil furnace technology is to heavy oil, light oil or combustible liquid as fuel. Light oil or combustible liquid as fuel. Heat conduction oil is the heat carrier. The use of circulating oil pump forced liquid phase circulation. The heat energy will be delivered to the heat equipment and then return to re-heat the DC special industrial furnace. Gas thermal oil furnace technology boiler body heating surface structure is compact, the heating surface by the inner and outer dense rows of the disk composition, the inner coil for the radiation heating surface, the outer coil and the outer surface of the inner coil constitutes a convection heating surface. The boiler consists of upper body and lower combustion chamber, site site combination. Combustion in the combustion chamber after full combustion, by the radiation heating surface to absorb most of the heat, high-temperature flue gas into the convection heating surface for heat transfer, out of the boiler in the air preheater to heat the boiler combustion of air required, and then through the dust collector by the induced draft fan will be sent to the chimney flue gas discharged into the atmosphere. Gas thermal oil furnace technology has a wide range of uses, mainly used in such as petrochemical. Textile. Printing and dyeing. Plastic. Rubber. Food processing. Wood processing. Asphalt Heating. Carton production. Vegetable dehydration. Paint baking. Casting sand mold drying, etc. Can also be used for ≤ 350oC baking, steaming, shaping, melting, drying.

Features of gas-fired thermal oil furnace

1、High efficiency Horizontal three-way structure, burner flame volume and heat exchange surface area of the balance of the flue gas outlet pipe to reach the optimal temperature, special thick insulation layer to minimize the heat dissipation of the boiler.

2、Safety Thickened boiler heat-resistant steel tube is a guarantee of boiler safety, automatic ignition program, automatic combustion control, automatic flame monitoring and alarm, over-temperature, over-pressure control and alarm to make the boiler more secure.

3, long service life Reasonable boiler structure, hot oil flow rate and flow rate of the overall consistency to ensure that the furnace tube will not burst because of carbonization, both to ensure the safety of the boiler, but also to extend the service life of the oil.

4、Multi-temperature furnace According to user requirements, a boiler can simultaneously output two or more different temperatures of thermal oil.

5, skid-mounted factory According to the user's requirements for different occasions, all the equipment will be installed together, skid-mounted factory.

6、Horizontal structure, easy to operate and use Horizontal boiler, neat and generous appearance, convenient and simple operation.

7, unattended controller centralized control, set of automatic detection, control, chain alarm prompts in one, boiler operation without guard.

Gas thermal oil furnace technology features:

1, easy to install, as long as the upper body and the lower combustion chamber together, the installation cycle is short.

2, the heating surface using dense rows of disc tube, heating surface arrangement is sufficient to reduce the tube surface heat load, so that the use of heat transfer oil safer.

3, the media flow is reasonable, heat transfer oil field low (import) to (export), the operation of the gas produced, better improve the thermal efficiency of the boiler.

4, the fuel in the combustion chamber for the adiabatic combustion, can make the combustion ignition easier, more fully combustion, better improve the thermal efficiency of the crossing.

5、The boiler's roof is arranged with a dense row of coils, which can better protect the roof and avoid burning the roof.