Gas heat transfer oil furnace technology is heavy oil, light oil or flammable liquid as fuel.Thermal oil as heat carrier.The use of circulating pump forced liquid cycle.Can heat energy to heat equipment and then returned to re-heated DC special industrial furnace, The heat conduction surface of the boiler is compact, the heating surface is composed of inner and outer discs, the inner coil is the radiation heating surface, and the outer surface of the outer coil and the inner coil constitute the convective heating surface. The heat conduction oil is a heat carrier, which is forced by the circulating oil pump to convey the heat energy to the heating equipment and then back to the reheating DC special type industrial furnace. The heat conduction surface of the boiler is compact, the heating surface is composed of inner and outer discs, the inner coil is the radiation heating surface, and the outer surface of the outer coil and the inner coil constitute the convective heating surface. The boiler is composed of an upper body and a lower combustion chamber, and the site is assembled at the site. Combustion in the combustion chamber after the full combustion, the radiation heat absorption of most of the heat surface, the high temperature gas into the convection heating surface heat transfer, the boiler in the air preheater in the boiler heating the air required for combustion, and then by the precipitator By the induced draft fan will be sent to the chimney into the atmosphere. Gas-fired heat oil furnace technology is widely used, mainly used for such as petrochemical. Textile. Dyeing. Plastics. Rubber. Food processing. Wood processing. Heating asphalt. Carton production. Vegetable dehydration. Paint. Cast sand mold drying, At ≤ 350oC baking, steaming, stereotypes, melting, drying.
Characteristics of gas - fired heat - conducting oil furnace
1, high efficiency horizontal three-return structure, the burner flame volume and heat exchange surface area of the balance of the exhaust pipe exhaust gas to achieve the best temperature, thick insulation layer to minimize the boiler heat dissipation.
2, safe thickening of the boiler heat-resistant steel pipe is the guarantee of boiler safety, automatic ignition procedures, automatic combustion control, automatic flame monitoring and alarm, over-temperature, over-pressure control and alarm to make the boiler more secure.
3, a long service life Reasonable boiler structure, thermal oil flow rate and flow rate of the overall consistency, to ensure that the furnace tube will not burst because of carbon and pipe, both to ensure the safety of the boiler, but also extend the oil life.
4, a furnace temperature according to user requirements, a boiler can output two or more different temperatures of the heat transfer oil.
5, skid the factory according to the user to use the requirements of different occasions, all the equipment installed together, skid the factory.
6, horizontal structure, easy to operate horizontal boiler, neat appearance, generous, easy to operate, simple.
7, unattended controller centralized control, automatic detection, control, alarm prompts in one chain, boiler operation without duty.
Gas-fired heat oil furnace technology features:
1, easy to install, as long as the upper body and the lower combustion chamber can be closed, the installation cycle is short.
2, the heating surface with dense rows of circular tubes, heating surface layout sufficient to reduce the pipe surface heat load, so that the use of heat-conducting oil more secure.
3, the medium flow is reasonable, low thermal conductivity oil field (import) to (export), the gas generated in operation, better improve the thermal efficiency of the boiler.
4, the fuel combustion chamber for the adiabatic combustion, combustion can make it easier, more fully burned, and better improve the thermal efficiency of the crossing.
5, the boiler roof layout of the coil-tight, better protection of the roof, to avoid burning roof